10
5. STARTINg CONNECTION WITh RECEIVER
Clicking the Connect button on the main screen will detect receivers in the network, and displays the status of
the detected receivers.
One PC can be connected up to Max. 16 receivers.
[Main screen (Connected)]
1
2
3
4
5
1. Receiver Display
Displays the status of the receivers connected
through USB to the PC.
2. Walk-Test button
Used to conduct the Walk-Test.
(See
)
3. Channel Scan button
Used to check unused channels.
(See
)
4. Spectrum Scan button
Used to check interference.
(See
)
5. FBS Detail button
Used to display the FBS filter parameter or its ON/
OFF status. (See
)
Note
Do not put the PC to sleep or in hibernation during the Connected status.
It will stop the connection.
Depending on the PC setting, the PC can be automatically set to hibernation or sleep. Change the setting if
necessary.
