4
2. INSTALLATION METhOD
2.1. Installation of WT-D5800 Maintenance Software
2.1.1. Installation method
The newest WT-D5800 Maintenance Software can be downloaded from the TOA website (http://www.toa-
products.com/international/).
Step 1. Execute Setup.exe in the downloaded software folder.
Starts up the installer.
Step 2. Install the software by following the instructions on the screen.
Creates a shortcut icon on the desktop when the installation is completed.
Note
The software can be uninstalled from “Programs and Features” on the PC’s control panel.
2.1.2. Folder configuration
The WT-D5800 Maintenance Software will be installed in the folder below as a default.
In the case of 32-bit OS: “C:\Program Files\TOA\WT-D5800”
In the case of 64-bit OS: “C:\Program Files (x86)\TOA\WT-D5800”
The installation folder configuration is shown below.
The Log Files created by this software will be stored in the data folder shown below.
C:\ProgramData\TOA\WT-D5800\log
Installation folder
WT-D5800_software.exe (Execution program)
WT-D5800_software_manual.pdf
Driver (Driver folder)
Files for driver installation
Data folder
Log Files*
Note
The data folder will not be deleted
even when the software is uninstalled.
Please manually delete all the
unnecessary data.
* The Log Files will automatically be saved under the following names:
[Receiver’s No.]_[Start Recording Date]_[Serial No.].[Extension]
(Example) 1_20130120-095326_001.nlg
The example above shows the Background Log that indicates Receiver 1’s recording started
at 9:53:26 on January 20th, 2013.
The Log Files will automatically be divided and designated Serial No. when the recording exceeds 24 hours.
Depending on the Log, different extensions will be assigned.
Background Log:*.nlg
Walk-Test Log:*.wlg
Spectrum Scan Log:*.slg File generated from text conversion function:*.log
