14
7. SySTEM STATUS DISpLAy
7.1. Receiver Display
Checks the receiver status on the Receiver Display.
The receiver’s setting will be displayed as below.
1 2
4
5
6 7
3
8
9
1. No.
Displays the receiver’s number.
The number will be automatically assigned at the
beginning of the connection.
2. Bank
Displays the assigned bank.
3. Channel
Displays the assigned channel.
4. Frequency
Displays the assigned frequency.
5. Encryption
Displays the ON/OFF status of the Encryption
setting.
6. Code
Displays the assigned Code number when the
Encryption setting is OFF.
7. FBS
Displays the ON/OFF status of the FBS setting.
8. EQ
Displays the status of the EQ setting.
9. Status
Displays the receiver’s status, such as a
connection error, during Spectrum Scan.
Note
When the following actions are taken after the receiver is connected, the connection error will occur and the
Status (9) will display “CommError.”
• The power of the receiver is turned off.
• The USB cable is pulled out.
• The PC is put to sleep or in hibernation.
Check to be sure the receiver power is ON, the PC and the receiver are securely connected and the PC is not
in sleep or hibernation mode.
