32
11.3.2. Adjusting the angle to the left or right over 45°
15º
15º x 6 = 90º
Speaker bracket
(upper side)
Step 1. Remove or loosen the bolts on the speaker
bracket’s upper and lower sides. Perform this
work for all speaker brackets.
Step 2. Direct the speaker unit to an angle of 45°.
As a rough guide, refer to the angle holes
provided at 15° intervals in the speaker
bracket.
Step 3. Loosely secure the SR-D8FB Fixing Bar to
the speaker bracket’s upper side. Perform
this work for all speaker brackets.
Use 2 of the removed bolts in Step 1 and a
nut supplied with the SR-D8FB.
Step 4. Direct the speaker unit to your desired angle.
Step 5. Securely tighten all loosened bolts and nuts.
Note
The removed bolts except those used in Step
3 are not used.
[Example of directing 90° to
the left facing the speaker front]
SR-D8FB
Rotate
4
3
[When directing to the right facing
the speaker front]
Loosen
Remove
Upper side
Upper side
Lower side
Remove
1
1
1
Rotate
Hex nut M8 (with flange,
supplied with the SR-D8FB)
Loosen
2
1
[When directing to the left facing
the speaker front]
Remove
Rotate
Loosen
Upper side
Lower side
Loosen
Remove
1
2
1
1
1
※
※
※ Hex bolt M8 x 25 (with spring and
plain washers) supplied with the
SR-D8FB may be used.
