27
11.2.2. Wall mounting
Below is the procedure for installation in 2-unit configuration.
Step 1. Install anchor stud bolts in the wall (see the figure in the lower right).
Note: For mounting dimensions in 3-unit and 4-unit configurations, see p. 30.
Step 2. Assemble the bracket sets to be mounted to the wall.
Step 3. Mount the assembled bracket sets to the wall.
Note
Gray area indicates speaker
mounting position.
Wall bracket of
the SR-D8WB
Wall bracket of
the SR-D8WB
SR-D8CL
Hex bolt M8×25
(with spring and plain
washers,supplied
with the SR-D8CL)
2
Hex bolt M8×25
(with spring and plain
washers, supplied
with the SR-D8CL)
2
32
125
418 (16.46)
353 (13.9)
125
1150.2 (45.28)
120.4
56 (2.2)
9-12×28
3
Wall
Unit: mm (in)
[Anchor Stud Bolt Mounting Dimensions
(2-Unit Configuration)]
(1.26)
(4.92)
(4.92)
(4.74)
(9-0.47×1.1)
Nut for M10
(Prepare separately.)
Anchor Stud Bolt M10
(Prepare separately.)
Bracket Mounting Anchor Stud Bolts (M10)
[Single nut]
[Double nut]
18 – 30
25 – 30
(0.71 – 1.18)
(0.98 – 1.18)
Wall
Wall
Unit: mm (in)
To determine stud bolt projection from the wall
surface, refer to the dimensions indicated below:
