28
Step 4. Remove screws from speaker sides.
Step 5. Attach each speaker bracket to the speaker.
Bracket
Mounting position
Remark
Hoisting Bracket On top of the speaker stack Mount an eyebolt.
Use only for hoisting the speaker stack at speaker
installation.
Speaker Bracket Center of each speaker
Securely tighten 6 angle adjustment bolts (4 on the
upper side and 2 on the lower side) of each speaker
bracket, then attach each bracket to the speaker.
Extension Plate Joint part of speakers
Step 6. Loosely tighten bolts in the mounting holes located on both sides of the lower part of each speaker
bracket.
SR-D8-S
5
6
4
Hex bolt M6×20 (with spring
and plain washers)*
1
Hex bolt M10×30
(with spring and
plain washers)*
3
Speaker bracket
of the SR-D8WB
Hoisting bracket of theSR-D8HB
Eyebolt of the SR-D8HB
*
1
Supplied with the SR-D8RB
*
2
Supplied with the SR-D8EP
*
3
Supplied with the SR-D8WB
A
A
5
6
4
Hex bolt M6×20 (with spring
and plain washers)*
2
Hex bolt M6×20 (with spring
and plain washers)*
3
Hex bolt M10×30 (with spring
and plain washers)*
3
R bracket of the SR-D8EP
L bracket of
the SR-D8EP
SR-D8-M
5
5
Loosely tighten
bolts.
Speaker bracket
of the SR-D8WB
Remove screws.
Securely tighten.
Securely tighten.
Note
Only 8 screws out of all removed
in this step are used in Step 10.
No other screws are used.
