Toa EXES-2000, Functions And Operating Instructions

Page: 10 / 35

7) Hands-free/Handset Substation
Handset
Dial keys
Handset speaker
In-use lamp
Privacy switch
Speaker volume switch
Base speaker
HF-200M+YC-200
<Making a call>
1. Touching the key allows a handsfree call to the
designated master station.
2. When it is desirable to use the handset, lift the handset and
press the key or first press the key and then pick
up the handset.
3. Begin to speak after the calling tone has been heard.
4. When the called party is busy, just wait. You can be put
through as soon as the line is free.
5. It is possible to transmit a one-way message by depressing
the key while the call tone is ringing or Privacy tone
is heard.
6. When either party is in a high noise level area during
handsfree conversation, the other party can send his voice
by using the handset or continuously depressing the
key while talking. Depressing the key
allows one-way conversation from the party who depresses
it, and seleasing the key reverses the one-way conversation
flow.
7. To terminate the conversation, hang up the handset or
depress the key.
HF-200M+YC-230S
<Responding to a call>
8. When desiring a handsfree response to the call received
with the Privacy switch set to OFF, just speak into the mic
after the call tone stops. Pick up the handset and begin to
speak when the handset conversation is desirable.
9. In the case that the Privacy switch is in the ON position, a
brief Privacy tone will sound each time there is an incoming
call and all incoming calls are refused.
To respond, depress the or key or pick-up the
handset while the line is still connected. The call is
automatically cancelled when no response is made within 5
seconds after the call has been placed.
Note.
1) The sound volume of the handset speaker may be adjusted
by means of the 2-stage volume selector (VOL) switch.
2) For calls or responses made from the station registered as
handset operated station by No. 24 programming, refer to
section 2) Handset substation (TL-600S).
– 8 –