Toa EXES-2000, Functions And Operating Instructions

Page: 27 / 35

(2) Selected station paging call
Dial
station numbers
and all the selected station can be paged.
This function is convenient when it is desirable to page only
specified stations. (In the case of normal station paging, all the
stations of the paged zone are called.)
Note.
1) All-call paging takes precedence of individual zone paging
that is equal to selected station paging in priority. When
there is all-call paging during zone or selected station
paging, zone or selected station paging is terminated.
2) When the station in the busy mode is paged, the conversa-
tion is interrupted to allow the paging call to go through. In
this event, a holding tone is transmitted to the conversation
partner of the paged party if that partner's station is not
within the same station group of the paged party. The
original conversation is restored immediately after the
paging call is finished.
3) Dialing is even possible from the station that is being paged
through station paging. This, however, terminates the
paging call.
4) When the station that is being paged through station paging
is called, a busy tone is heard from the calling station.
(3) Paging response
The paged party can respond to the page by dialing from the nearest
station (All-call paging response), (1 through 3.
Zone paging response) or (Selected station paging
response).
Note.
Those paged during conversation and wishing to quickly
answer from the interrupted station should depress or
replace a handset before dialing for response.
2. Emergency all-call paging
Dialing from the specific station programmed for this function
places a highest-priority paging call that covers all paging zones.
Depress (Mic off) and wait if the response is required. By dialing
from the nearest station, the paged party can make the
response.
Note.
1) Making the emergency all-call paging terminates all other
paging calls or conversation.
2) It is impossible to terminate the emergency all-call paging
while waiting for the response. The paging party has to wait
for the response without terminating it.
3) Even during the emergincy all-call paging, the following
functions may be operated from the station so long as it is
not the station which initiated the emergency all-call paging.
A) Response to the emergency all-call paging
B) Selection of desired BGM program
C) Door remote control
D) General purpose control
No. 23
No .35
No. 48
Selected station paging
Station No. Station No. Station No.
– 24 –