14
Operating Instruction
TNI
soft
Flow
50
homecare system
3) Startup of
TNI
soft
Flow
50
homecare system
3.1) Structure and composition
•
Place the unit/system horizontally on a plane surface.
•
Make sure that the system is located below head
height. Insert the mains cable into the power socket
at the right side of the device.
•
Insert the power plug into the power outlet.
3.1.1) Filling an inserting the humidifier homecare complete
•
The Humidifier homecare complete contains:
o “Water chamber humidifier homecare”
o “Cyclone element humidifier homecare”
o “Lid humidifier homecare”
•
Remove the preassembled “humidifier homecare complete” from the packaging or from
TNI
soft
Flow
50
.
•
Please refer additionally to the descriptive image sequence.
•
Remove the “lid humdifier homecare” flapping the locking tab upwards on all sides.
•
Remove the “cyclone element humdifier homecare” (pull it out upwards).
•
Fill the “water chamber humidifier homecare” with the recommended water up to the
“max” mark.
o After filling the water level must be in the area of „min/max“.
o The mark „max“ must not be exceeded (see picture on the right).
•
Insert the “cyclone element humidifier homecare”.
•
Close the “lid humidifier homecare” and lock it.
•
Carefully push the “humidifier homecare complete” into the device.
•
Make sure that no water can access into the system.
•
Close the housing front lid.
WARNING
Hygiene
•
Use authorized parts only.
•
Make sure that the hygiene regulations are met.
•
Use originally packed and unexpired parts only.
SAFETY NOTE
In order to ensure an optimal treatment,
•
do not use the “water chamber humidifier homecare” after it had been dropped or run dry,
which will trigger the alarm “refill water”.
•
Remove the “humidifier homecare complete” BEFORE transporting, tilting or moving the
device.
