DIGITAL WEIGHING INDICATOR TI-5700
- 49 -
11.3. Command mode
◊
When performing a command, the received command or reply data is sent back
◊
Command
p
rotocols
Start code
Command
End code
STX (0x02)
ASCII data
ETX (0x03)
In response protocols do not have start code and end code.
◊
Optional addresses can be appended to a command.
The address form is "@address" and the address is specified at Setting mode
F35, 44. The reply (Data or error code) is also sent with the address.
(If the ID is 13, command is @ 1 3 R W
)
◊
When the received command can
‟t be performed such as the "busy" state, the
code "I" is sent back. (STX I ETX)
In this case, please check the indicator is ready to accept commands.
◊
When receiving an undefined command, a "?" is sent back. (STX ? ETX)
Commands to request data
Function
Command
Response
Request Display Data
RW
ST,GS,+00123.0kgC
R
L
F
Request Gross Data
RG
ST,GS,+00123.0kgC
R
L
F
Request Net Data
RN
ST,NT,+00123.0kgC
R
L
F
Request Accumulated Data
RA
Refer to fixed data format
(7.3. Accumulation)
