DIGITAL WEIGHING INDICATOR TI-5700
- 11 -
4.3. Option board install
This is the procedure for the OP-01 to OP-07 option board.
Step 1. After power off, remove the AC adapter or batteries.
Step 2. As shown in the figure below, remove the two screws and the blank panel.
Step 3. Align the option board with guides inside of option part and Insert the
option board to the connector of main board.
Step 4. Tighten the screws of option board.
4.4. Mount bracket install (OP-12)
Step 1. After power off, remove the AC adapter or batteries.
Step 2. Remove the panel guide bracket.
Step 3. As shown in the figure below, secure the mount bracket to both sides with
the bolts provided.
4.5. Accessories
◊ Operation manual ◊ AC adaptor (12VDC 1A) ◊ Load cell plug (7pin)
