2
Installation instructions
Controller connection
The controller can be mounted on a wall mount (included in the kit as a standard option) or on a vertical
support (available as an extra option). The mount is fixed to a wall with rawl plugs (included in the kit),
following which the controller can be easily snapped onto the mount.
When the vertical support is used, first it needs to be fixed to the surface, and then the rails at the back of
the controller can be used to snap it securely on the support.
Connect the supply cable to a 230 V, 50 Hz power outlet with an earth contact.
The ambient temperature in the controller mounting location may not exceed 40°C.
CAUTION: The connection cable of the regulator may only be replaced by the manufacturer.
CAUTION: JOKER controller is only able to operate when the system is filled with water. If the system is
empty,
the controller must be disconnected from the power supply. Otherwise the pump may become
damaged.
General technical data:
-
Supply voltage 230V/50Hz
-
Maximum pump output
3
x100VA
, 1x250VA(stoker), 1x5VA(valve)
-
“Anti-stop” function (pump protection against “jam”) – activated for 30 sec. every 14 days
-
Antibacterial protection of tank water against Legionella bacteria _ _ _ _ _ _ _ _ _ _ _
_ SWITCHED OFF
Default
settings
b
lower
and stoker
switch off
b
lower
and stoker
switch on
m
anual mode
screen
CAUTION
- if no button is pressed, after five seconds the display returns
automatically to MAIN SCREEN.
W
ORKING MODE SCREEN press [MODE]
-
on the MAIN SCREEN
CAUTION
- pressing [START] or [STOP] buttons will be confirmed on the
display. Current working status is visible only after re-entering the
WORKING MODE screen.
......................................................................
MONITORING OF DEVICES AND TEMPERATURES
(SENSORS) SCREEN - press [MENU] to open
-par. J
CAUTION
- the "Monitoring of devices and sensors" screen does not
return automatically to the MAIN SCREEN.
30 current
blower speed
device is switched o
ff
%
device is switched on
C.H. timed programme "day temperature" active
D
.H.
W. tank
timed programme "
night
temperature" active
„M” -
manual mode
