background image

Minute hand

Button A ; -1 hour / push

Hour hand

(Difference in time correct, move

Crown at normal position

together with dual time 60 minute
regulator hand)

Button B ; +1 hour / push

Second hand

Dual time of 60 minute regulator hand

24 hour hand

(Difference in time correct, move together

(Indicates the time on a 24 hour basis)

with dual time 12 hour regulator hand)

Note

*Dual time of 60 minute regulator hand rotates one revolution every 15 minute.
There is no problem because this is typical function.

Before setting the time , check if the dual time of 12 hour regulator and dual time of 60 minute regulator
hands are in the "0"(12o'clock) position.
If either of the dual time of 12 hour regulator and dual time of 60 minute regulator hands are not in the
"0" position, reset them following the procedure below.
The battery setting and after battery change, please execute the "0" position adjustment.

1.Pull out the crown

3.Press button A or B to reset the

4.Push the crown back to

VD33;second click

dual time of 12 hour regulator and

the normal position.

VD34;first click

dual time of 60 minute regulator
hands to "0"position.

2.Keep the buttons "A"&"B"

*By pressing button A the hands

pressed at the same time

 move counter clockwise.

more than 2 seconds,

*By pressing button B the hands

and then release the buttons.

 move clockwise.

*Dual time of 60 minute regulator

*Press and hold the button, 

hand moves. Returned to where

 possible to fast-forward modification. 

it was.

*Dual time of 12 hour regulator hand are
 linked to dual time of 60 minute regulator hand.

Note

Please repeat above 4 steps, as 0 position adjustment, if the dual time of 60 minute regulator hand
moves as follows;
Up to 1 minute to 14 minutes, one step/push, in 15 minutes, repeat the one rotation / push 

OPERATION

Version-01

VD33&VD34

SII Products

8

DISPLAY AND CROWN / BUTTON OPERATION

Dual time of 12 hour regulator hand

ADJUSTING THE DUAL TIME OF 12 HOUR REGULATOR AND DUAL TIME OF 60 MINUTE REGULATOR HANDS POSITION

Dual time of 12 hour regulator hand adjustment

Dual time of 12 hour regulator hand adjustment

A

B

A

B

First position
 VD33;Date setting
 VD34;Time setting

Second position
 VD33;Time setting

Summary of Contents for VD33A





































Reviews: