TM RACING 2012 TM 100 MX, User And Maintenance Manual

Page: 57 / 84

ENGLISH
ENGLISH
57
FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE
CICLOPS HEADLIGHT (SMM)
REPLACEMENT OF HEADLIGHT/POSITION LIGHT BULB
Release both of the elastic stripes and move the light-holder mask
forward.
HEADLIGHT BULB
Disconnect the terminal, remove the cover (4) and the seal (5). Unscrew
the screws (6) and remove the retainer (7). Loosen the Allen screw (8)
and carefully extract the bulb (9).
Replace with an equivalent one, tighten the Allen screw again, re -
mount the retainer in the correct position and lock with the screw,
taking care to insert the engine stop eyelet terminal under the head
of the screw.
Remount the cover with the seal and connect the terminal.
HIGH BEAM BULB
Remove the rubber protection (10), unscrew the screw (11) and carefully
extract the bulb (12). Replace the bulb with an equivalent one.
Remount the retainer in the correct position and lock with the screw,
taking care to insert the engine stop eyelet terminal under the head of
the screw.
Reposition the rubber protection.
POSITION LIGHT BULB
Extract the bulb-holder (1) from the parabola, replace the bulb (2). Re -
mount the bulb-holder.
Repositon the light-holder mask and fix it with the elastic stripes
WARNING
NEVER TOUCH THE GLASS BULB, TO PREVENT LEAVING TRACES OF
GREASE.
TO BE SURE OF INSERTING THE ESTABLISHED BULBS, CONSULT THE
“CYCLE PART TECHNICAL DATA” TABLE
9
7
8
6
10
12
11 13
4
5
2
1