172-65256M-00 (VFM-T2) 7 Sep 2001
15
NOTE: The waveform indicates
the connected status of the
transmitter.
<Caution>
l
l
Avoid turning P1 with excessive force as it could result in damage.
l
l
When JP1 and JP2 are set to “1ms”, the pulse width becomes 1ms (fixed).
l
l
Set the pulse width to a suitable flow rate range to ensure that the pulse
does not become too heavy.
Operation and Adjustment for Setting and Modifying the Analog Output
Circuit (Optional)
The items in the following section can be set and modified by switching the jumper
J1, SW1 and SW2 on the F/I board.
The analog output signal is adjusted by controlling the P1 (SPAN) and P2 (ZERO)
volume.
P1 (SPAN) Volume
P2 (ZERO) Volume
F/I Board
Pulse Width