Specifications
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are PRESSURE
SHELL DESIGN CONDITIONS,
NOT OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate when
there are no options.
Motive Medium
Pressure Range
GP14-B (other than below)
GP14-B (Cast Iron in Europe)
0.03 - 1.4 MPaG
0.03 - 1.3 MPaG
0.3 - 14 barg
0.3 - 13 barg
5 - 200 psig
5 - 185 psig
Maximum Allowable
Back Pressure
0.05 MPa / 0.5 bar / 7 psi less than motive medium pressure used
(but not to exceed 1.05 MPaG / 10.5 barg / 150 psig)
Configuration
CAUTION
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations may
restrict the use of this product to below the conditions quoted.
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing may
damage the product, leading to fluid discharge, which may cause burns
or other injury.
Exhaust Outlet
Exhaust Outlet
Motive Medium Inlet
Motive Medium Inlet
Pumped Medium
Inlet
Pumped Medium
Inlet
Snap-action Unit
Cover
Pumped Medium
Outlet
Pumped Medium
Outlet
Lever Unit
Cover Gasket
Cover Bolt
Body
Float
Nameplate
Refer to the product nameplate for detailed specifications.
Nominal Diameter
Maximum Allowable Pressure*
Maximum Operating Pressure
Valve No.**
Model
Serial Number
Maximum Allowable Temperature* TMA
Maximum Operating Temperature TMO
Motive
Medium Inlet
Exhaust Outlet
Plug
Intake
Valve Unit
Exhaust Valve Unit
— 7 —
English
Summary of Contents for PowerTrap GP14-B
Page 2: ......
