6. Removing/Reinstalling the Intake Valve and Intake Valve Seat
(Motive Medium)
The following procedure can be used to remove and replace the intake (motive medium)
valve without first removing the cover of the PowerTrap.
Part
Disassembly
Reassembly
Plug /
Plug Gasket
･
Using a 38 mm (1 ") socket wrench,
loosen the plug.
･
Finish loosening by hand, and remove
the plug and plug gasket.
･
Coat plug threads with anti-seize
and reinstall plug and plug gasket.
･
Tighten to a torque of 160 N·m
(115 lbf·ft).
Intake Valve
(motive medium) /
Screen
･
Using needle-nose pliers, remove the
intake valve and screen.
･
Replace the screen and valve
with new, and assemble in
reverse order of disassembly.
Intake Valve Seat
(motive medium) /
Valve Seat
Gasket
･
Using a 17 mm ( ") socket wrench
with an extension bar, loosen the
valve seat.
･
Using needle-nose pliers, grasp and
remove the valve seat.
･
Using a needle tool, dislocate the
valve gasket, then catch and lift it out
with either the needle or needle-nose
pliers.
･
Make sure you have removed the
old valve gasket. Insert and
position a new gasket.
･
Coat threads of valve seat with
anti-seize.
･
Using needle-nose pliers, insert
the valve seat.
･
Tighten to a torque of 160 N·m
(115 lbf·ft).
(1 N·m
≈ 10 kg·cm)
/
1 2
/
21 32
NOTE: It is possible to remove
and replace the intake
valve (motive medium)
without first removing the
cover of the PowerTrap
(see instructions above).
Plug
Plug Gasket
Intake Valve
(Motive Medium)
Screen
Intake Valve Seat
(Motive Medium)
Valve Seat Gasket
Intake Valve
Unit
— 29 —
English
Summary of Contents for PowerTrap GP14-B
Page 2: ......
