172-65287MA-04 (DC3A-L) 7 Oct 2021
9
Separating/Reattaching Body and Separator Body
Part
During Disassembly
During Reassembly
Body Bolt 17
Remove with a wrench
Consult the table of tightening
torques and tighten to the proper
torque
Separator Body 2
Pull down and out from the body,
being careful not to let the
separator and wave spring fall as
they come out with the separator
body
Make sure there are no pieces of
the old gasket left on the sealing
surfaces of the separator body
and body, align the guide pin on
the separator body with the
guide pin hole on the body and
reattach
Separator 4
Remove when detaching the
separator body
Insert into the groove in the
separator body
Wave Spring 11
Remove with the separator
Insert it into the groove
Screen 13
Remove, being careful not to
bend
Place on top of the separator,
being careful not to bend
Body Gasket 12
Remove, being careful not to
scratch the surfaces
Replace with a new gasket
Table of Tightening Torques
Part
Size
Torque
Distance Across
Flats
mm
(in)
N.m
(lbf·ft)
mm
(in)
Body Bolt 17
15 - 40
(
1
∕
2
– 1
1
∕
2
)
60
(44)
17
(
21
∕
32
)
50
(2)
70
(51)
19
(
3
∕
4
)
Trap Cover Bolt 18
15 - 40
(
1
∕
2
– 1
1
∕
2
)
60
(44)
17
(
21
∕
32
)
50
(2)
70
(51)
19
(
3
∕
4
)
Trap Valve Seat 8
15 - 40
(
1
∕
2
– 1
1
∕
2
)
15
(11)
13
(
1
∕
2
)
50
(2)
40
(29)
17
(
21
∕
32
)
Float Cover Bolt 15
15 - 50
(
1
∕
2
– 2)
20
(15)
13
(
1
∕
2
)
NOTE: -Coat all threaded portions with anti-seize.
-If drawings or other special documentation were supplied for the
product, any torque given there takes precedence over values
shown here.
(1 N
m
10 kg
cm)
