Enterview 2 / Enterview 2V
4 WIRE VIDEO DOORPHONE SYSTEM
INSTALLATION AND OPERATION
IMPORTANT : Installation precautions
Before installing this Video Doorphone System please take note of the following:
DO NOT
position the units where they will be subjected to extremes of moisture, temperature, rust
or dust. Do not install the units in extremely cold locations and avoid any extreme temperature
variations.
DO NOT
install the outdoor unit in a location where the lens filter is likely to get scratched or very
dusty.
DO NOT
overload mains wall outlets or extension cords
1. Introduction
This Video doorphone System is an easy-to-use system offering many benefits and conveniences,
such as relieving the anxiety of not knowing who is at the door, to the security-conscious business or
homeowner:
Automatic video transmission:
When the visitor presses the outdoor call button, the video
camera automatically transmits the image of the visitor to the indoor unit while a pleasant
electronic chime signals that the visitor is at the door in addition to two-way audio communication.
No-fuss installation:
With the aid of the step-by-step instructions in this guide, the professional
installer or the average person can complete fixing and wiring quickly and easily.
Push-button simplicity:
The young and old alike will find the system extremely easy to operate.
High quality image :
This system uses the latest CCD video camera technology for the clearest
image.
Auto-IRIS:
Camera exposure automatically adjusts to sun light conditions.
Infrared LED for greater clarity in low light.
An LED lamp at the outdoor unit aids identification
of night-time callers without the need for any extra lighting.
Electronic Door Release (option):
An optional function that lets you open the door and lets your
visitor in simply by pressing the DOOR KEY button.
Additional Monitor (option):
This system is capable of having up to 3 additional monitors, and
can be used to a interphone system between monitor and the other ones.
IMPORTANT :
Before attempting to install or operate the system, be sure to study these instructions
thoroughly. If there is anything you do not understand, remember that the Helpline is just a phone call
away with technical support for the installer and for the end user.
2. Precaution before installing or using the system
General care and cleaning
To clean simply wipe with a soft cloth, dampened slightly in a mild soap solution.
DO NOT
spray with an aerosol polish as it may enter the units and cause damage.
DO NOT
use abrasive cleaners as they may damage the finish.
KEEP
the camera lens filter and the monitor screen free of grease and dust.
Recommended installation heights
80cm
110
°
140cm
130cm
130cm 145cm
