4. Description of controls
4-1. Monitor unit
2
1
4
5
8
9
10
16
3
7
17
6
11
12
13
14
15
<Monitor>
<Handset>
<REAR VIEW>
<FRONT VIEW>
<BACKET>
DOOR OPEN
INTERPHONE
MONITOR
1.
HANDSET
2.
HANDSET EARPIECE
3.
HANDSET MOUTHPIECE
4.
HOOK SWITCH:
Handset must be replaced in the correct position on this switch for video
image to be received and chime to sound.
5.
INTEGRAL SPEAKER:
Electric door chime is heard through this speaker.
6.
MONITOR SCREEN:
Visual image appears on this screen when caller presses the Call button
on the outer unit.
7.
POWER LED LAMP:
Monitor on - Green, Interphone mode - Red,
Outdoor call under interphoneing - Yellow
8.
DOOR OPEN BUTTON:
Activate optional DC12 electronic door release
(where a door releaser is installed)
9.
INTERPHONE:
You can call and communicate with another slave monitor.
10.
MONITOR BUTTON:
Press the monitor button just to see who is outside with or without lifting
handset as surveillance function.
11.
BRIGHTNESS CONTROL:
Adjusts the brightness of the image on the monitor screen.
If the button is pushed to the end of the left, the screen will be off.
12.
VOLUME CONTROL:
Adjusts the volume of the door chime heard through the speaker.
13.
WALL MOUNTING BRACKET:
Used when the indoor unit to be wall mounted.
14.
DOOR KEY TERMINALS:
Connect the 2line wire for releaser (DC12V)
15.
WIRE TERMINALS:
Connect the wires from camera terminals as shown in the wiring diagram.
16.
AC POWER TERMINAL:
Connects the unit to the power cord and then fasten the safety cover.
17.
MEMORY TERMINAL (OPTION):
Remove the jumper and connect the wire connector to the
optional memory unit.
18.
AC POWER PLUG (not illustrated):
For connecting the unit to the mains power supply.
