TKS
Operator's manual
36
3.5 Menu
Open the menu for programming the feed
dispensing machine. Press the
Menu
key at the
bottom left of the Menu bar.
• Groups
– Defi ne the groups in the barn
• Forage
– Set-up the fi lling source for forage
• Grain
– Set-up the fi lling source for
grain feed
• Cutter
– Settings for the feed dispensing
machine
• System
– System settings. Resetting the
set-up
• Language
– Select screen language
• Alarms
– Error messages and warnings lo
• Timecounter
– Displays operating time for
the machine
• Multifi lling
3.5.1 Defi ne groups
This window is used to program the groups in
the barn
• Select group no.
• Enter the name of the group
• Drive the machine to the position where the
group (the enclosure) starts with the arrow
keys.
• Press
Set machine position
- set
Start key
• Drive the machine to the position where the
group ends.
• Press
Set machine position
– the
End
key
• Select dispensing side for the side
dispenser.
Left – Right
• Press
Next
to defi ne a new group
• Note!
Manual grain feeding applies only to
grain 1
• The machine speed
is adjusted in the box
or with the hotkeys. +/ - 10% for each press.
• Note!
Higher machine speed means less
feed per metre driven.
• Grain
quantity is adjusted in the box.
Here too, higher machine speed means less
grain per metre driven. When grain is fed
out once, the value is set back to the preset
value and it is ready for the next feeding.
Fig. 57
Fig. 58
