![TKS K2 CombiCutter Operator'S Manual Download Page 29](http://html.mh-extra.com/html/tks/k2-combicutter/k2-combicutter_operators-manual_1121134029.webp)
TKS
Operator's manual
29
1 – Feed 2kg of grain 1 to group 1;
2 –
Feed 2kg of grain 1 to point in position 5,
on the right side
3 –
Feed 3kg of grain 2 to group 1
4 –
Feed 6kg of grain 2 to point in position 5, on
the left side
How to programme when feeding 50kg of
forage at the same time as 1kg of grain 1 and
1.5 kg of grain 2 to group 2:
The way to programme the same amount as in
previous examples, if you do NOT want to feed
forage at the same time as grain.
Then grain is started after forage is fi nished:
NOTE!
Grain 1 and Grain 2 must never be fed out at
the same time.
You must fi nish one to start the second.
This is how the same amount is programmed
as in previous examples, but not at the same
time.
Then grain starts after forage is fi nished:
NOTE!
Grain 1 and Grain 2 must never be fed out at
the same time.
You must fi nish one to start the second.
Fig. 46
Fig. 47
Fig. 48a