FITTING INSTRUCTIONS
Product:
T13 Outback Frontal Protection System
Vehicle:
Ford Ranger PXIII
Part No.
070SB13N21W
For product warranty please refer to our website www.tjm.com.au
F-27198.docx
Page 14 of 27
04/11/2021
52.
Centralize the chassis mount / winch frame to
the vehicle by measuring diagonally from
mount tip to headlamp corner as shown,
equalize sizes as close as practical.
53.
Tension the fasteners from step 51 to the
relevant torque settings listed on page 2.
54.
Using spacers (4mm) and (2mm) supplied,
align faces between chassis, chassis mount
and chassis support bracket, assemble loosely.
54.1.
Using M12 x 1.25 x 90mm hex bolts (1),
M12 nyloc nuts (1)
& 1/2” x Ø1
-
1/4” flat
washers (2) fasten loosely in place.
54.2.
Using M12 x 1.25 x 50mm hex bolts (2),
M12 nyloc nuts (2)
& 1/2” x Ø1
-
1/4” flat
washers (4) fasten loosely in place.
REPEAT ON LHS.
If necessary, use any combination of
the supplied 2mm shims on the
relevant side (or sides) of the chassis
mount to assist in centering the
chassis mount / winch frame to the
vehicle.
=
=
RHS SHOWN
SPACERS
STEP 54.2
STEP 54.1
