FITTING INSTRUCTIONS
Product:
Outback & Fleet Frontal Protection System
Vehicle:
Toyota 70 Series 09+
Part No.
Ente 070SB13F69G 070SB13L69G 070SB13O69G 070SB15W69G 070SB15Z69G
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
File: 88700
Page 4 of 12
22/08/2017
6. Insert the nylon plugs supplied into the
square cutouts for the indicators and
also into the square cutouts in the
front face of the FPS for the number
plate.
7. Install the indicator / park light wiring
looms to the vehicle.
Steps 8 through to 18 only apply if a
Deluxe FPS is being fitted. If fitting
a Fleet FPS, please proceed to step
8. Check that all parts for fog light
installation have been supplied.
9. Install the fog light wiring loom and the
Toyota fog light switch to the vehicle.
10. Connect the wiring loom to the fog
lights and check the operation of the
fog-lights, then disconnect and tie up
the loom.
If fitting to a V6 Petrol variant,
secure the Relay Brackets to the
O.E Battery J-Bolt by following
Steps 11-14.
11. Secure each relay to the relay bracket,
using an M6 x 1.0 x 12mm pan head
screw (1), M6 x Ø12.5mm flat washer
(1) & M6 spring washer (1).
070SB13L69G SHOWN
