FITTING INSTRUCTIONS
Product:
Outback & Fleet Frontal Protection System
Vehicle:
Toyota 70 Series 09+
Part No.
Ente 070SB13F69G 070SB13L69G 070SB13O69G 070SB15W69G 070SB15Z69G
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
File: 88700
Page 10 of 12
22/08/2017
Step 30 only applies if a Deluxe FPS
is being fitted. If fitting a Fleet FPS,
please proceed to Step 32.
30. If no winch is to be fitted, place the
fairlead cover plate (88593) in position
(as shown) and secure it in place
using M6 x 1.0 x 16mm bolts (2), M6 x
Ø12.5mm flat washers (2) and M6
flange nuts (2).
Step 31 only applies if a Fleet FPS
is being fitted. If fitting a Deluxe
FPS, please proceed to Step 32.
31. If no winch is to be fitted, place the
winch cover plate with nutserts
(F-10694) in position and secure it in
place using M6 x 1.0 x 20mm bolts (2),
M6 spring washers (2) and M6 x
Ø12.5mm flat washers (2) as shown.
32. Slide the FPS over the vehicle's
chassis rails. Then, on the left hand
and right hand side, secure the FPS in
place to the chassis rail using M12 x
1.25 x 130mm bolts, nuts, spring
washers and 1/2" flat washers (finger
tighten only).
Ensure that proper lifting safety
procedures are adhered to when
lifting this product.
070SB13L69G SHOWN
070SB13F69G SHOWN
