FITTING INSTRUCTIONS
Product:
Outback & Fleet Frontal Protection System
Vehicle:
Toyota 70 Series 09+
Part No.
Ente 070SB13F69G 070SB13L69G 070SB13O69G 070SB15W69G 070SB15Z69G
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
File: 88700
Page 11 of 12
22/08/2017
33. Loosely secure both sides of the FPS
in place, at the indicated positions,
using the fasteners listed below:
33.1. M10 x 1.25 x 30mm hex screws
(4), M10 spring washers (4) &
M10 x Ø30mm flat washers (4).
33.2. M10 x 1.25 x 25mm hex bolts
(4), M10 spring washers (4) &
M10 x Ø30mm flat washers (4).
34. Loosely secure both sides of the FPS
to the chassis rail, at the indicated
positions, using M10 x 1.25 x 30mm
hex screws (2), M10 spring washers
(2) & M10 x Ø30mm flat washers (2).
35. Align the FPS with the vehicle. Once
satisfied, tighten all fasteners.
36. Secure the vehicle number plate to the
FPS through the nylon plugs using
10g x 3/4" screws.
070SB13L69G SHOWN
070SB13L69G SHOWN
STEP 33.1
STEP 33.2
