FITTING INSTRUCTIONS
Product:
Outback & Fleet Frontal Protection System
Vehicle:
Toyota 70 Series 09+
Part No.
Ente 070SB13F69G 070SB13L69G 070SB13O69G 070SB15W69G 070SB15Z69G
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
File: 88700
Page 3 of 12
22/08/2017
* Check for (and remove) any build up in all captive nuts fitted to the FPS.
1.
Read instructions fully before
commencing fitment.
2. To remove the bumper; on the left
hand and right hand side, remove and
discard the main centre bolt which
secures the bumper to the chassis rail.
The centre bolts can be removed
with the bumper in place. To do
this, angle the bolts towards the
front of the bumper whilst lifting the
bolts. If this is unable to be
achieved, disassembly of the
bumper may be required.
3. On the left hand and right hand side,
remove and discard the 4 outer bolts
securing the bumper to the chassis.
4. Remove the bumper.
Step 5 only applies if a Deluxe FPS
is being fitted. If fitting a Fleet FPS,
please proceed to step 6.
5. Remove the tow lug from the vehicle.
Discard the tow lug and fasteners.
Tow Lug
RH SHOWN
