Tivok T-HP20AB, Installation And Operation Manual

Page: 14 / 34

Tivok Energy T-HP20AB Heat Pump Installation Manual
12
ON/OFF TIMER SETTING
With this function, the heat pump can turn on or off automatically at a preset time. When “Timer on” is activated, the heat
pump starts and thereafter, the “on/off” can be controlled automatically based on the temperature setting
When “Timer Off” has been reached, the heat pump will shut down and the machine can no longer be controlled
automatically based on the temperature. This sequence will be restarted when the next “Timer on” period is reached
3 ON/OFF timers can be set at once, and applied for use either everyday or for only one day. in the timer setting status,
based on the figure shown below, it represents NO time sequence has been set. However, if it shows “--:--” on the
bottom, the timer is invalid.
The examples shown below demonstrate how to set up the heat pump to switch on at 9:10 and switch off at 12:30 (1st
Timer); Switch on at 14:10 and switch off at 17:30 (2nd Timer) and switch on at 19:10 and switch off at 15:30 (3rd Timer)
1ST TIMER SETUP
ATTENTION
if you want to use the “Time on/Timer off” functions, the system time has to be correct. To set this, refer to page 16
Step 1
Step 4
Step 2
Step 5
Step 3
Step 6
Press twice to start the ON
time setting
Press or to adjust
the hour value
Press or to adjust the
minute value
Flashing
Flashing
Flashing
Flashing Flashing