Titon aura-t Product Manual Download Page 5

Page: 5 / 32

Product Overview

The

aura-t

™ is a programmable touch screen controller which monitors and displays

the status of a Titon ECOaura HRV unit. It allows the unit to be commissioned,
and gives the user both manual and timed control of fan speeds. The

aura-t

™ is

connected to the HRV via a low voltage connection and can be sited remotely from
the unit.

The

aura-t

™

SMART

units can also connect and to the Titon

auraSMART

® app using

WiFi either directly or using a WiFi network and can be used to commission and
control the HRV.

Packaging Contents

Inspect the unit when taking delivery. Check the unit for damage and that all
accessories have been supplied.

Package supplied with:-

1 x

aura-t

™ controller.

1 x ~3m

aura-t

™ communication cable.

1 x Product Manual.

Any shortages or damage must be immediately reported to the supplier.

Dimensions

23.70

aura-t

™ and

aura-t

™

SMART

Summary of Contents for aura-t

































Search results

Summary of Contents for aura-t

Reviews:

Related manuals for aura-t

Brands by name

Popular brands

Titon aura-t, Product Manual

Search results

Summary of Contents for aura-t

Reviews:

Related manuals for aura-t

Brands by name

Popular brands