27
Operating the riveting tool
Note
Grease the thread (mandrel (4) and blind rivet stud (b))with
non-corrosive oil, so that the blind rivet nut or stud is easily
screwed and unscrewed.
• Position the blind rivet nut (a) or stud (b) on the mandrel (4) or internal-
thread mandrel (3).
• Gently press the trigger (12) down and hold (first level): the blind rivet
nut or stud is automatically unscrewed by the right-handed rotation of
the air motor.
Note
The right-handed rotation stops automatically when the head of
the blind rivet nut (a) or stud (b) is positioned on the
nose piece.
• Insert the unscrewed blind rivet nut (a) or stud (b) in the prepared bore
(no photo).
• Push the trigger (12) through as far as possible and hold; this will secure
the rivet shank.
• Release the trigger (12): the appliance automatically switches the left-
handed rotation; the mandrel is unscrewed from the blind rivet nut and
the internal-thread mandrel is unscrewed from the blind nut or stud.
• Tap the trigger (12): the left-handed rotation stops.
1
4
a
12
1
3
b
12
Ms50_gb_241001_neu.qxd 30.10.2001 9:01 Uhr Seite 27
Summary of Contents for RIVETEC RL 50
Page 44: ......
