6. Service
a. Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR
MULTI-CUTTER
FOR
TOOL
1. Wear ear protection with cordless tool
. Exposure to noise can cause hearing loss.
2. Hold tool by insulated gripping surfaces when performing an operation where the accessory
may contact hidden wiring.
Contact with a ‘live’ wire will also make exposed metal parts of the tool
‘live’ and shock the operator.
3. Remove the battery pack from the tool before carrying out adjustments.
4. Do not expose to rain or water.
5. Do not store the battery pack in temperatures over 50°C.
6. Always charge the battery pack between temperatures 0°C to 50°C. Ideal charging temperature
is 18°C to 24°C.
7. Only use the charger and the battery pack provided, no other battery is suitable.
8. Avoid short circuit of the battery pack connections (screws & nails).
9. Do not incinerate or burn the battery pack, it may explode.
10. Do not charge a damaged battery pack.
11. Replace any damaged supply cords on your charger
, this must be carried out by a suitably
qualified person
.
13. Your battery pack and charger will be warm during charging, this is normal.
14. When not in use, remove a charged battery pack from the charger.
15. Always remove the battery pack from the charger immediately after re-charging is completed.
16. Your tool and battery pack will be warm when working, this is normal.
17. Do not dispose of batteries in fire, or with household waste. Return exhausted batteries to
your local collection or recycling point.
18. Always check walls, floors and ceilings for hidden power cables and pipes.
19. Accessories and metal parts can become very hot.
20. This tool is not suitable for wet sanding. Never use the water during working! And never use
the sanding sheet suitable wet sanding.
21. Never use the same sanding sheet for wood and metal. Please make sure the sanding sheet
can be used in working price.
22. Do not touch the moving sanding sheet.
23. Do not continue to use worn, torn or heavily clogged sanding sheets.
24. Do not work on materials containing asbestos. Asbestos is considered carcinogenic.
25. Secure the work piece (a work piece clamped with clamping devices or in a vice is held more
securely than by hand).
FOR CHARGER
1. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
2. Charger is double insulated for additional electrical safety.
3. Charger is for indoor use only.
10.8V MULTI-CUTTER TTP448HTL
12. Always disconnect the charger power supply before making or breaking the connections to the
battery pack.
