Fig. 6
Fig. 7
Fig. 4
Fig. 5
Warning:
The LED light located on the head of
the tool will flash if the user insert the battery pack
when the switch is on the ON position. Always switch off
the tool before inserting the battery.
3. INSTALLING AND REMOVING
ACCESSORIES
Warning:
Switch off and remove battery from the
tool before installing and removing accessories.
Loosen the clamping bolt with washer from the tool using
the hex key and remove it. (Fig.6 & 7)
To install accessories, align holes in accessory with
locating pins on accessory holder. (Fig.6 & 7)
Securely tighten with the hex ke
Bosch and Erbauer blades can fit on the holder
without adaptor.
y. (Fig.8)
into position. Make sure the release button on battery
pack snaps in place and the battery pack is secured in
tool before beginning operation.
Fig. 8
10.8V MULTI-CUTTER TTP448HTL
