4. Installing cutting spool
1). Put the backing flange (27) on the spindle (26).
2). Rotate the backing flange (27) until its hole is aligned with the notch in the gear head.
3). Insert the torx screw driver (40) into the hole to lock the spindle(26) and the backing flange (27).
4). Screw the Cutting spool (33) onto the spindle anticlockwise (Fig. 6b).
5). Remove the torx screw driver (40).
6b
25a
25b
26
27
33
40
6a
.
5). Remove the torx screwdriver (40).
25a
26
27
40
28
41
30
29
Summary of Contents for TTL530GBC
