AIR FILTER
1. Inspect the air filter regularly. Clean it at least every 25 hours or replace with a new one if
necessary.
2. Press the clips of air filter, then open the air filter box(19)(Fig.26). Tap the filter on a stable
surface to remove dust. Use high pressure air (max. 3 bar) to remove stubborn dust(Fig.27).
3. Apply a small amount of air filter oil on the filter to increase the filter performance. Wring out
surplus oil and put the filter into the case.
4. Close the air filter box(19).
FUEL
1. Empty the fuel tank when storing the petrol brush cutter over 30 days to avoid deterioration
of the fuel.
2. Open the tank by unscrewing the tank cap and use a proper fuel pump to empty the tank.
NOTE: Petrol deteriorates over time. Engine starting may be difficult if you use petrol kept for
more than 30 days. Always empty the fuel tank when storing over 30 days.
FUEL FILTER
The fuel tank of this petrol brush cutter is fitted with a filter located at the free end of fuel pipe.
Periodically ask an authorised service centre or similar qualified person to check and replace
it.
SPARK PLUG
Inspect the spark plug at least every 25 hours, clean and replace with a new one if necessary.
1. Unplug the spark plug connector by pulling.
2. Loosen the spark plug with the spark plug wrench and remove it.
3.
The colour of the electrode shall be light brown.
Check the spark plug for damage and wear.
19
Fig.26
Fig.27
43CC PETROL BRUSH CUTTER TTL530GBC
Summary of Contents for TTL530GBC
