25b
25a
5d
3) Remove the trimming guard (25b) completely(Fig.5d).
.
2). Fit the cutting blade (28) on the spindle (26).Ensure the cutting blade sits firmly on
the extruded ring on the backing flange (27).
3). Put the locking flange (41) and the blade protect cover (30) on the cutting blade (28).
4). Insert the torx screw driver (40) into the hole to lock the spindle(26) and the backing flange (27).
Tighten the M10 nut (29) with the multi tool (39) anticlockwise completely.
1). Put the backing flange (27) on the spindle (26). Rotate the backing flange (27) until its hole is
aligned with the notch in the gear head.
3. Installing cutting blade
Attach the trimming guard (25b) to cutting guard (25a)
5e
Insert the the trimming guard (25b) to the cutting guard (25a), making sure the two buttons and
the center buckle engage completely(Fig.5e).
25a
25b
Summary of Contents for TTL530GBC
