WARNING! Always attach the product to the harness. Do not carry it just
by hand!
1). Remove the harness from the loop, open the securing clip(37).
2). Place the harness(38) so that is runs over the left shoulder, crossing the chest and back.
The securing must be located at the right hip(Fig.12).
3). Adjust the length of the harness so that the hook is approximately 15cm below your waist;
locate the product to the harness by using the securing clip (36) that the angle of the cutting
head is parallel to the surface being cut(Fig.13).
4). In case of emergency, pull the rope of the quick release mechanism. The metal locking bar
will be released from the harness(37) automatically by opening the securing clip(36) because
of the weight of the machine, and the machine will drop away from you(Fig.14).
36
37
12
F ig .1 4
F ig .1 2
F ig .1 3
Fitting and adjusting the harness
Summary of Contents for TTL530GBC
