background image

VIBRATION

The European Physical Agents (Vibration) Directive has been brought in to help reduce

hand arm vibration syndrome injuries to power tool users. The directive requires power

tool manufacturers and suppliers to provide indicative vibration test results to enable users

to make informed decisions as to the period of time a power tool can be used safely on a

daily basis and the choice of tool.

Further Advice can be found at www.hse.gov.uk

Vibration total values (triax vector sum) determined according to EN 60745:

Cutting

Vibration for cutting a

h

 = 5.871m/s

2

Uncertainty K = 1.5m/s

2

The declared vibration emission value should be used as a minimum level and should be 

used with the current guidance on vibration.

Calculating the actual period of the actual period off use can be difficult and the HSE 

website has further information.

The declared vibration emission been measured in accordance with a standardised test 

stated above and may be used to compare one tool with another.

The declared vibration emission value may also be used in a preliminary assessment of exposure.

WaRninG: 

The vibration emission value during actual use of the power tool can 

differ from the declared value depending on the ways in which the tool is used 

dependant on the following examples and other variations on how the tool is used:

How the tool is used and the materials being drilled.

The tool being in good condition and well maintained

The use the correct accessory for the tool and ensuring it is sharp and in good condition.

The tightness of the grip on the handles.

And the tool is being used as intended by its design and these instructions.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed

WaRninG: 

identify safety measures to protect the operator that are based on an

estimation of exposure in the actual conditions of use (taking account of all parts of 

the operating cycle such as the times when the tool is switched off and when it is running 

idle in addition to the trigger time).Note The use of other tools will reduce the users’ total 

working period on this tool.

Helping to minimise your vibration exposure risk.

Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)

Avoid using tools in temperatures of 10°C or less

Plan your work schedule to spread any high vibration tool use across a number of days.

Health Surveillance All employees should be part of an employer’s health surveillance 

scheme to help identity any vibration related diseases at an early stage, prevent disease 

progression and help employees stay in work.

Summary of Contents for TTB591ROU





















Reviews: