Titan TTB591ROU, Safety And Operating Manual

Page: 16 / 20

Ensure that you use the correct setting for the
maximum rated speed of the router bit used.
Speed position
Symbol indicator of
speed(min
-1
)
1 11000
2 15000
3 20000
4 24000
5 27000
6 29000
Max 30000
noTE: Above speed table maybe can not accurate
match your product speed, as it is our experience
data. Just for reference.
12. STaRTinG THE RoUTER
noTE:
Before starting work make sure workpiece
is firmly secured.
To start the router, press in lock off button with
thumb then push on/off switch. Hold the two handles
firmly and let the router reach full operation speed,
lower the router to its working position, lock router
with plunge lock leve. Move smoothly through
workpiece. Release switch and lock lever,
allow router to return to top starting position. Let the
router stop fully before removing from workpiece.
noTE: Stop the router before adjusting the variable speed.
Direction of feed
The router rotates in a clockwise direction, as a
consequence the router must be moved left to right as you
face the workpiece and anti-clockwise for outside edges.
Rate of feed
it is important to move the router at the correct speed
through the work. The incorrect speed may produce a
poor quality cut. Moving too fast can cause bit damage
and a rough uneven cut.
A too slow speed can cause the wood to burn and the
bit to overheat. The rate of feed will vary depending on
the size of bit, material and router speed. To determine
the best speed always practice on a small unseen
area or a spare piece of the same material first.
WORKING HINTS FOR YOUR ROUTER
1. Using without a guide
This is useful for signwriting and creative work.
Use only shallow cuts.
2. Rate of feed