© Titan Tool Inc. All rights reserved.
3
When transporting a unit with a gas
engine, make sure to shut the fuel off
.
WARNING: Before proceeding, follow the Pressure
Relief Procedure outlined in the “Warning” section of
this manual. Additionally, follow all other warnings to
reduce the risk of an injection injury, injury from mov-
ing parts or electric shock. Always unplug the sprayer
before servicing!
CAUTION: For detailed engine maintenance and specifi-
cations, refer to the separate engine manual supplied.
Routine Maintenance:
Daily:
Check and fill the gas tank. After the first 20 hours of
operation: Drain the oil and refill with clean oil.
Daily:
Check the engine oil level and fill as necessary.
Weekly:
Remove the cover of the air filter and clean the
element. Replace the element if necessary. If operating in
an unusually dusty environment, check the filter daily and
replace if necessary.
Replacement elements can be purchased from your local
TITAN
Dealer.
Weekly:
Check the level of the Piston Seal Lubricant (PSL)
in the displacement pump packing cup. Fill it if necessary.
Keeping PSL in the cup helps lubricate the packings and
piston.
After each 50 hours of operation: Change the engine oil.
Spark Plug:
use only a (NKG) BP6ES plug. Gap the plug to
0.025 - 0.30 in. (0.7 -0.8 mm). Be sure to use a spark plug
wrench when installing and removing the plug.
If you have any further questions concerning your
sprayer, call
TITAN:
Customer Service Department
1-800-526-5362
Fax
1-800-528-4826
Outside the U.S. Call
1-201-405-7520
Outside the U.S. Fax
1-201-405-7449
Canada
1-800-565-8665
Fax
1-905-856-8496
PowrLiner Maintenance
¤
