Titan MTX-Router-Titan, User Manual

Page: 113 / 200

Matrix Electrónica – MTX ‐ Router ‐ Titan User Manual ‐ Rel3.00.3.09
Page 113
http://www.mtxm2m.com
Subject to changes without prior notice

AT^MTXTUNNEL=GETGPSPOSITION
Action : Returns the GPS position when the MTX-Router-Titan-3G router includes an
internal GPS module (or an external module that is connected via a USB or RS232
interface)
Example : AT^MTXTUNNEL=GETGPSPOSITION

AT^MTXTUNNEL=OVPNS,minutes
Action : If the VPN > OpenVPN Server section is configured as an on-demand OpenVPN
service, the service can be activated in server mode for the specified time.
Example : AT^MTXTUNNEL=OVPNS,5
(
This example activates the VPN for 5 minutes
)

AT^MTXTUNNEL=OVPNC,minutes
Action : If the VPN > OpenVPN Client section is configured as an on-demand OpenVPN
service, the service can be activated in client mode for the specified time.
Example : AT^MTXTUNNEL=OVPNC,5
(
This example activates the VPN for 5 minutes
)

AT^MTXTUNNEL=RESETCOUNTER,1
Action : If the digital input is used as a pulse counter, the count can be reset to the
value specified in the command.
Example : AT^MTXTUNNEL=RESETCOUNTER,1
(
This example resets the current value of the count to 1
)

AT^MTXTUNNEL=COMMAND,timeout,command
Action : This command allows you to carry out special commands in the Titan router.
The commands currently available are “ping” and “traceroute”. A timeout (in seconds) can
be specified as well as the command to be executed.
Example : AT^MTXTUNNEL=COMMAND,5,ping –c 3 8.8.8.8
(
This example executes 3 pings to the IP 8.8.8.8 with a timeout of 5 seconds
)