Matrix
Electrónica
–
MTX
‐
Router
‐
Titan
User
Manual
‐
Rel3.00.3.09
Page
103
http://www.mtxm2m.com
Subject
to
changes
without
prior
notice
Additional Notes.
- Once the configuration is complete, press the “SAVE CONFIG” button to save the
changes. Remember that the router should be reset in order for the changes to take effect.
- On the previous screen you can see a link with the text “Click here for download MIB”.
Download the file to obtain the MIB with the OIDs.
- Using SNMP you can monitor the router. For example, you can request information
from the router such as the RSSI (network coverage), the time and date, the up time,
whether it is working in 2G or 3G mode, the network operator being used, etc. It is also
possible to find out the status of the router’s relays, as well as change their statuses. The
same is possible with digital inuts and pulse counters.
- An interesting option can be found in the section “Action”. Here you will see that two
actions are possible. Firstly, you can reset the router remotely. Secondly, you can execute
an AT command remotely via SNMP (writing in the corresponding register will excute the AT
command and reading the register will obtain the response). Sending AT commands allows
you to carry out any action using SNMO from reading a Modbus device that is connected to
the router to changing configuration parameters or reading the GPS position.
- There is an Application Note regarding the use of SNMP and Traps, where you can find
further examples of their applications and obtain a greater understanding of their capabilities:
