Titan HD4P-12000, Installation, Operation & Maintenance Manual

Page: 22 / 44

18
SAFETY LOCK CONTROL
Press and hold the lowering control (Fig. B)
until the safety lock blocks are engaged to
level safety ladder stops on the columns.
(Fig. C)
Lowering
Control
Fig. A Fig. B
Fig. C
6.3 OPERATION
VEHICLE LOADING
1. Make sure front tire stop plates are in place and, position vehicle on lift runways by
having another person guide you onto the runways.
2. Check for proper weight distribution (center of gravity should be evenly distributed
between columns).
3. Set vehicle parking brake and chock tires to prevent vehicle movement.
4. Use caution before lifting pickup trucks, suv’s and other vehicles. The individual axle
weight capacity should not exceed 1/2 of lift capacity.
5. Make sure vehicle is neither front nor rear heavy.
6. Make sure to install all front and rear tire stop plates prior to raising the lift with a
vehicle.
RAISING THE LIFT
1. Push the up button (Fig. A) to raise lift until platform runways clear the floor.
2. Stop and check for vehicle movement and vehicle weight distribution. If secure raise to
desired height.
3. Always lower the lift to the nearest lock position by pressing the lowering handle (Fig.
B) to relieve the hydraulic pressure and let the safety lock blocks set in a level locked
position.
4. Never work under a lift that is not in a level safety locked position.