8
5-INSTALLATION INSTRUCTIONS
IMPORTANT: BEFORE ATTEMPTING TO ASSEMBLE THIS LIFT TO MAKE SURE
THAT THERE IS ENOUGH ROOM FOR ALL COMPONENTS. THE SAFETY ROD
ASSEMBLY WILL TAKE UP ADDITIONAL SPACE WHILE BEING INSTALLED. KEEP
THE FLOOR AREA CLEAR OF THE LIFT COMPONENTS UNTIL THEY ARE READY TO
BE INSTALLED.
ASSEMBLY VIEW
POWER UNIT LOCATION
1) The power unit should be located at SAME SIDE as the POWERSIDE runway (with
cylinder.) Utility rails on the side of each runway MUST be installed to the inside.
For
the remainder of this instruction manual we will illustrate the power unit mounted at
the DRIVER-SIDE (LEFT) FRONT column.
Summary of Contents for HD4P-12000
