Titan 3515, Operation And Parts Manual

Page: 42 / 78

3515 Flex-Wing Rotary Cutter 42 Titan Implement, LLC
February 2020 (423) 334-0012
7.2 Transporting
1. Make sure the safety chain from the rotary cutter is
attached to the tractor drawbar cage. The safety
chain should be long enough for tight turns. Don’t
allow the chain to drag on the pavement because
it will wear the chain links, causing an unsafe
condition.
2. Prior to towing, make sure the brakes, brake lights,
running lights, turn signals, and hazard lights on the
tractor are operating correctly.
3. Raise the rotary cutter with the tractor hydraulics.
Lower the transport lock onto the cylinder and insert
the pin to lock the transport lock in place.
4. Make sure the jack stand is secured in the storage
location.
5. Fold the wings onto the wing rests.
WARNING
Pinch Point Hazard
Do not place hands or fingers between moving
and/or stationary parts. The weight of the unit
will easily cause serious bodily injury.
Crush Hazard
When folding the wings, make sure to install
both wing uplock pins.
6. Install the wing fold uplock pins and retaining pins.
7. Transport to the work site following all applicable
regulations and all the safety instructions in this
manual.
WARNING
Crush Hazard
The rotary cutter is top heavy when
the wings are raised. To avoid injury
or death from rollover, use caution when transporting
over uneven surfaces and slow down for turns.