12
d.
Insert the handle
into the hole at the
other end of the
Screw rod weldment
through the rear
bracket hole, adjust
the length of the
handle, screw in the
m8x20 bolt and
tighten it.
FIGURE 11:
Handle installation
Note
Pay attention to the meshing of welding parts and gear disc.
WARNING
SAE EP 90W Gear oil must be filled before you finish the final assembly and start your first use.
Overfilling or underfilling gear oil may cause gearbox seizing or damage.
Summary of Contents for 170311
Page 5: ...5...
