11
STEP 2: Installing Handle, Rear Bracket and Screw Rod
assembly
a.
Locate the front bracket on the position shown in the
Figure 8
, and then fix it with M10x25 bolt, plain washer 10
and spring washer 10
FIGURE 8:
Front bracket installation location
b.
Locate the Rear bracket on the position shown in the
Figure9
, and then fix it with M10x20 bolt, large plain
washer 10 and spring washer 10
FIGURE 9:
Rear bracket installation location
c.
Insert the pin shaft into the hole of the front
bracket, put the washer 28 into the inner side,
and then fix the Screw rod weldment with the pin
shaft with the M6x45 bolt and locknut M6;
FIGURE 10:
Screw rod weldment installation
Summary of Contents for 170311
Page 5: ...5...
