TP 500 II
26
/
70
3. Safety regulations
Failure to comply with the following safety instructions, in addition to errors in handling the
device, can result in serious injuries.
Be informed!
Read
the
operating
manual
carefully before using the device.
Caution: Danger of crushing!
Do not insert fingers into the pulley
area.
Protect yourself!
Always wear eye, face and hand
protection (cut-resistance gloves)
when working.
Caution:
Strap only objects tob e packed!
Make sure that no hands or other
body parts are between the strap
and the goods to be packaged.
Attention: Strap can break!
The
strap
can
break
during
tightening! Do not stand in the path
of the strap. Make sure that no one
else is in the working area.
Attention: Strap flies outward!
When cutting the strap, hold the top
part firmly and stand to the side.
Attention:
The lower part of the
strap will fly outward.
Use only original TITAN
replacement parts!
The use of other than original
TITAN replacement parts will void
the warranty and all liability.
Use only lifting gear that complies
with the safety regulations!
Do not exceed air pressure!
Never exceed the max. permissible
air pressure of 6,5 bar.
Do not use gas or compressed
air cylinders!
Do not connect the tool to a gas or
compressed air cylinder.
The use of straps other than
recommended can result in broken
straps during the tightening process
and insufficient strapping.
Use only
corresponding quality products
from TITAN!
This tool may be operated only by
personnel who have been trained
accordingly. Please consult your
TITAN packaging consultant
if
you have any questions about this.
Workplace!
Always
maintain
an
orderly
workplace. A disorderly workplace
can
cause
accidents.
When
operating the crimper, make sure
that you‟re in a well-braced position
in order to maintain optimum
balance and prevent the risk of
falling. Never operate the tool in an
awkward working position!
Maintenance!
In order to operate safely, the tool
must be properly maintained. Check
the condition of your tool regularly
for defects or worn parts. Never use
a tool that has defects or worn
parts. Modifications to the tool are
strictly prohibited. Failure to comply
with this regulation can result in
serious injury.
max. 6,5 bar
H TP 500 II EU 04/12
Summary of Contents for 0002
Page 22: ...TP 500 II 22 70 11 Konformit tserkl rung H TP 500 II EU 44 11...
Page 42: ...TP 500 II 42 70 11 Declaration of conformity of the machine H TP 500 II EU 44 11...
Page 62: ...TP 500 II 62 70 11 D claration CE de conformit des machines H TP 500 II EU 44 11...
Page 64: ...TP 500 II 64 70 12 Explosionszeichnungen Exploded drawings Vue clat e H TP 500 II EU 50 13...
