TP 500 II
36
/
70
9. Maintenance & cleaning
Disconnect the TP 500 from the air supply before
starting maintenance and cleaning.
9.1. Replacement of the cutter
Disconnect the hose (Pos. 88) from the welding motor
(Pos. 501).
Remove both fastening
screws to take off the welding
motor (Pos. 501).
Remove the pressure spring (Pos. 20).
If the cutter (Pos. 21) cannot be removed apply air
pressure through the disconnected hose (Pos. 88) to
push the piston down.
The cutter (Pos. 21) now can be removed.
Grease the new cutter (Pos. 21) and pressure spring (Pos. 20), and reassemble it in reverse
order.
H TP 500 II EU 04/12
Summary of Contents for 0002
Page 22: ...TP 500 II 22 70 11 Konformit tserkl rung H TP 500 II EU 44 11...
Page 42: ...TP 500 II 42 70 11 Declaration of conformity of the machine H TP 500 II EU 44 11...
Page 62: ...TP 500 II 62 70 11 D claration CE de conformit des machines H TP 500 II EU 44 11...
Page 64: ...TP 500 II 64 70 12 Explosionszeichnungen Exploded drawings Vue clat e H TP 500 II EU 50 13...
