30
ASSEMBLY INSTRUCTIONS
Step 01:
Install the Front bottom tube (2) and Rear bottom tube (3) to the Main frame
(1) with the Allen bolts (17), Spring washers (18) and Arc washers (16) as
shown.
Step 02:
A: Slide the Mast cover (58) onto the Handlebar post (4).
B: Connect the Extension sensor wire (59) with the Sensor wire (64) first, and
then connect the Tension cable (61) with the Cable from the Tension
controller (57) properly as shown.
C: Lock the Handlebar post (4) onto the Main frame (1) with the Allen bolts
(53), Spring washers (18) and Flat washers (12), then slide down the Mast
cover (58) and fit in place.
Summary of Contents for 270-000485
