TITAN LIFE 270-000485, Manual

Page: 36 / 41

36
COMPUTER MANUAL
The things you should know before exercise
A.
User Data:
You should input your personal data before workout. Press BODY FAT key to
enter your personal data of sex, age, height and weight then the computer
can save the data unless take out the batteries.
B.
Clock Mode:
a. The computer will enter the clock mode when there is no signal input
or no keys be pressed after 4 minutes. You can press ENTER key to
switch the clock and temperature at the clock mode or press other
keys to quit the clock mode.
b. You can setup the CLOCK by holding UP+ENTER keys; and ALARM by
holding DOWN+ENTER keys for over 2 seconds, then you can quit by
ENTER key.
c. By holding the ENTER and UP keys together for over two seconds,
you can check the current clock at “NO SPEED” mode.
Functions and Features:
1.
CLOCK: Display the current clock in hour and minute and second.
2. ALARM: You can set up your morning call or setting time by this
computer and it will beep alarm 1 minute when your setting time is
reached.
3. TEMPERATURE: Display the current temperature.
4. SCAN: During the exercise stage, the computer will automatically scan the
function of TIME, SPEED, DISTANCE, CALORIES, PULSE and RPM per
each for 6 seconds unless press the ENTER key to exit the auto-scan
function. When the computer exits the manual-scan then the message
window will show “SCAN” for 2 seconds then switch to auto-scan
function.
5. TIME: Shows your elapsed workout time in minutes and seconds. Your
computer will automatically count up from 0:00 to 99:59 in one second
intervals. You many also program your computer to count down from a
set value by using the UP and DOWN keys. If you continue exercising
once the time has reached 0:00, the computer will begin beeping, and
reset itself to the original time set, letting you know your workout is
done.
6. SPEED: Displays your workout speed value in KM/MILE per hour. If no
speed signal input then the computer will display “NO SPEED” on the
window.